CoolEFI Cruiser View larger

CoolEFI Cruiser

New product

CoolEFI Cruiser version 0.3-alpha
Freescale 9S12XDP512 Development Module

More details

There is a 2 week lead time for this product.

$70.00

Add to wishlist

More info

CoolEFI Cruiser version 0.3-alpha
Freescale 9S12XDP512 Development Module

Core specs:

  • Freescale MC9S12XDP512MAL processor with 16MHz crystal.
  • FTDI USB (bus powered) communications (USB-A board edge connector).
  • Rx/Tx LEDs for USB communications troubleshooting.
  • Load/Run LED connected to Port A6.
  • Solder bridge pads for enabling LEDs.
  • Reset momentary switch.
  • Load momentary switch.
  • Port T0-3 inputs/outputs with 1k current limiting resistors.

It is powered by the USB bus to allow for easy transport for development work. Plug it into your laptop, notebook or tablet and develop code on the go.
The current design is a 50mm x 50mm PCB (shaped like a key) which has an USB-A male connector. There are solder bridge pads on the bottom layer to allow the LEDs to be connected or not, depending on whether the user would like the LEDs for troubleshooting or stealth. 

Some have used either clear (to see the LEDs) or black (to hide the LEDs) heat shrink tubing to protect their Cruiser boards.  You will need a piece of 1-1/2" (37mm - 38mm) heat shrink tubing if you decide to protect your Cruiser.

Reviews

Additional Resources

Additional Resources for the CoolEFI Cruiser:

  • Windows FTDI VCP (Virtual Communications Port) driver from FTDI
  • Windows FTDI VCP (Virtual Communications Port) driver hosted at CoolEFI
  • Linux FTDI VCP (Virtual Communications Port) driver from FTDI
  • Linux FTDI VCP (Virtual Communications Port) driver hosted at CoolEFI

No customer reviews for the moment.

Write a review

CoolEFI Cruiser

CoolEFI Cruiser

CoolEFI Cruiser version 0.3-alpha
Freescale 9S12XDP512 Development Module

Accessories